Silver Shop
Maximum profit: 20%
Gold Shop
Maximum profit: 21%
Platinum Shop
Maximum profit: 22%
Top

Geometry: The Shape Decides More Than the Speed

Knowledge Center Nov 19, 2026
Ball nose or bull nose for 3D finishing?

Ball nose gives a constant radius and predictable scallop height, which makes it the standard for 3D surfaces. A bull nose (corner radius) tool removes material faster and leaves a flatter floor, but its scallop profile changes with stepover. Use ball nose for steep, curved geometry and bull nose for floors and shallow slopes. Reducing stepover is usually cheaper than switching geometry when finish is the problem.

Single flute or three flute for aluminium?

Single flute maximises chip room, which matters in deep pockets, plastics, and high-rpm spindles on light machines. Three flute gives better finish, higher feed rates, and a stronger core, which matters for wall finishing and production work. If you are fighting chip evacuation, go single flute; if you are fighting finish or cycle time, go three flute.

What is a variable helix tool for?

A variable helix changes the flute pitch along the tool so that each flute hits the workpiece at a different moment. That breaks the regular excitation that causes chatter, and it is why variable-helix tools often outperform constant-helix tools in unstable setups. They are not a substitute for rigidity, but they buy margin when the machine or fixture is the weak link.

How much should I reduce parameters for long reach tools?

Long reach tools deflect, so reduce radial engagement before you reduce feed per tooth. A rule of thumb is to cut radial depth roughly in proportion to the stiffness loss, which falls with the cube of the overhang. In practice, take a spring pass, listen for chatter, and inspect the wall for taper. If the wall is tapered, the tool is pushing away and you need either less engagement or a shorter tool.

Want this checked against your own part?
Send your material, operation and existing parameters — an application engineer replies with a tool suggestion and, if useful, a trial-cut sample.
Chat on WhatsApp